A TDDFT study of some dinuclear compounds containing CpM(CO)3 or CpM(CO)2 groups

The electronic structure and spectroscopy of some representative dinuclear compounds containing CpM(CO)₃ and CpM(CO)₂ groups were studied using TDDFT (Time Dependent Density Functional Theory). These compounds contain Cp (cyclopentadienyl) as a ligand, and M can be Cr, Mo or W. Their main electronic transitions were calculated and the results are in good agreement with the experimental data. This allows the assignment of some bands whose origin was not clear. In all the cases, the carbonyls and Cp groups restrict the symmetry. The molecular orbitals that would be involved in M-M bonding interact strongly with the carbonyls and show unusual shapes and occupations. The strongest electronic bands are caused by σ→σ* transitions in most of the molecules containing CpM(CO)₃ groups, whereas in molecules such as Cp(CO)₂M≡M(CO)₂Cp the most intense bands are produced by π→π* transitions. The origin of other bands is now explained. The effect of the solvent on the electronic transitions and the use of EOM-CCSD method in some compounds were also checked.     

Multifunctional Sulfur-Hyperdoped Silicon Nanoparticles with Engineered Mid-Infrared Sulfur-Impurity and Free-Carrier Absorption

Si nanoparticles (NPs), which are innovative promising light-harvesting components of thin-film solar cells and key-enabling biocompatible theranostic elements of infrared-laser and radiofrequency hyperthermia-based therapies of cancer cells in tumors and metastases, are significantly advanced in their near/mid-infrared band-to-band and free-carrier absorption via donor sulfur-hyperdoping during high-throughput facile femtosecond-laser ablative production in liquid carbon disulfide. High-resolution transmission electron microscopy and Raman microscopy reveal their mixed nanocrystalline/amorphous structure, enabling the extraordinary sulfur content of a few atomic percents and very minor surface oxidation/carbonization characterized by energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy. A 200-nm thick layer of the nanoparticles exhibits near−mid-infrared absorbance, comparable to that of the initial 380-micron thick n-doped Si wafer (phosphor-dopant concentration ≈10¹⁵ cm⁻³), with the corresponding extinction coefficient for the hyperdoped NPs being 4–7 orders higher over the broadband spectral range of 1–25 micrometers. Such ultimate, but potentially tunable mid-IR structured, multi-band absorption of various sulfur-impurity clusters and smooth free-carrier absorption are break through advances in mid-infrared (mid-IR) laser and radiofrequency (RF) hyperthermia-based therapies, as envisioned in the RF-heating tests, and in fabrication of higher-efficiency thin-film and bulk photovoltaic devices with ultra-broad (UV−mid-IR) spectral response.     

Dinuclear gold (I)-di-N-heterocyclic carbene complexes: syntheses,structure, density functional theory calculation and photoluminescence study

The synthesis and characterizations for a series of dinuclear gold (I)-di-NHC complexes, 1–8 through the trans-metalation method of their respective silver (I)-di-NHC complexes, i–viii are reported (where NHC = N-heterocyclic carbene). The successful complexation of a series of unusual non-symmetrical and symmetrical di-NHC ligands, 3,3'-(ethane-1,2-diyl)-1-alkylbenzimidazolium-1'-butylbenzimidazolium (with alkyl = methyl, ethyl, propyl, butyl, pentyl, hexyl, heptyl, benzyl) with the gold (I) ions are suggested by elemental analysis, Fourier transform-infrared, ¹H- and ¹³C-NMR data. The ¹³C-NMR spectra of 1–8 show a singlet sharp peak in the range of 190.00–192.00 ppm, indicating the presence of a carbene carbon that bonded to the gold (I) ion. From single crystal X-ray diffraction data, the structure of complex 6 with the formula of [di-NHC-Au (I)]₂·2PF₆ is obtained [where NHC = 3,3'-(ethane-1,2-diyl)-1-hexylbenzimidazolium-1'-butylbenzimidazolium]. The photophysical study in solid state of 6 displays an intense photoluminescence with a strong emission maxima, λ_em = 480 nm, upon excitation at 340 nm at room temperature. Interestingly, the emission maximum at 77 K shows a structural character with a strong peak at 410 nm, a medium at 433 nm and a weak at 387 nm, accompanied by a tail band to about 500 nm.     

Controlled synthesis of ZnO nanoparticles from a Zn(II) coordination polymer: Structural characterization,optical properties and photocatalytic activity

A zinc coordination polymer derived from pyridine-2,6-dicarboxylate (PDC), {[Zn₂(PDC)₂]}_n, was successfully prepared via conventional, sonication and microwave-irradiation methods. The composition and characteristics of the obtained coordination polymers (CPs) were investigated by elemental analysis, TGA/DTA, X-ray diffraction and spectroscopic techniques. The so obtained CPs were heat-treated in the air at 600 °C for 2 h to produce ZnO of nanosized particles (NPs). It is of interest to note that the synthesis approach of the precursor greatly affects both the nanoparticle size and the structure of the resulting ZnO NPs. Moreover, the smallest particle size was associated with the sample derived from the ultrasonically prepared precursor. TEM analysis revealed that all samples have sphere-like morphologies. Structural analysis of the prepared ZnO samples was conducted and compared using Rietveld analysis of their PXRD patterns. Optical band gap calculations based on analysis of the UV–vis spectra of ZnO samples using Tauc's power law were achieved. The highest band gap of 3.63 eV was observed for ZnO sample obtained from the ultrasonically prepared precursor. Furthermore, the photocatalytic activity of ZnO NPs for the removal of Eosin Y color was monitored. The highest removal efficiency was recorded for ZnO originated from the ultrasonically synthesized precursor. Enhancement of removal efficiency that reached 98% was attained in only a period of 8 min. Its recycling test showed that it can be reused without structural changes over four cycling experiments.     

Optimization of extraction and quantification technique for phenolics content of garlic (Allium sativum): An application for comparative phytochemical evaluation based on cultivar origin

A range of conventional, i.e. maceration, percolation, ultrasonic assisted, Soxhlet and Soxtec extraction (STE), to advanced extraction techniques of accelerated solvent extraction (ASE) was utilized for the first time in order to optimize the extract yield and recovery of phenolics—gallic acid (GA), rutin (RT) and quercetin (QT)—quantified via ultra-high performance liquid chromatography with diode array detector (UHPLC–DAD). The effect of solvents (n-hexane, dichloromethane and methanol) and temperature (60, 80 and 100°C) upon extraction yield, phenolic content and antioxidant activity (DPPH, ABTS and DPPH) was studied, and the method was validated in commercial food samples from Saudi Arabia, China and India. A high extract yield with percentage recovery was observed for STE (1221.10 mg/5 g; 24.42%) and ASE techniques (91.50 mg/1 g; 9.15%) in methanol at 100°C. UHPLC–DAD showed retention times (min) of 0.67, 1.93 and 1.90 for GA, RT and QT, respectively in the shortest runtime of 3 min. The yield for phenolics was higher for STE/ASE (ppm): 15.27/15.29 (GA), 85.24/37.56 (RT) and 52.20/33.40 (QT), respectively. In terms of antioxidant activities, low IC₅₀ values (μg/ml) of 1.09/1.18 (DPPH), 2.11/5.32 (ABTS) and 4.35/7.88 (phenazine methosulfate–nicotinamide adenine dinucleotide) were observed for STE and ASE, respectively. Multivariate analysis for STE showed a significant (P = 0.000) correlation for extraction type vs. extract yield and phenolics content; however, there was no significance for antioxidant activities vs. extraction type. ASE showed a positive correlation for solvent vs. extraction yield, phenolics and antioxidant activity; however, there was no correlation for extraction yield and DPPH activity. Principal component analysis for STE showed a major variability (52.02%) for extraction yield and phenolics in PC1 followed by PC2 (38.30%) for antioxidant activities. For ASE, PC1 (48.68%) showed a positive correlation for solvent vs. extraction yield and phenolics while PC2 (33.12%) showed a positive correlation for temperature and antioxidant activities. STE and ASE were the optimized extraction techniques for the garlic food sample while a significant effect of solvent and temperature was observed upon extraction yield, phenolics and antioxidant activity.     

Purity determination of a new antifungal drug candidate using quantitative 1H NMR spectroscopy: Method validation and comparison of calibration approaches

Quantitative nuclear magnetic resonance (qNMR) is an analytical technique that offers numerous advantages in pharmaceutical applications including minimum sample preparation and rapid data collection times with no need for response factor corrections, being a powerful tool for assaying drug content in both drug discovery and early drug development. In the present work, we have applied qNMR, using both the internal standard and the electronic reference to access in vivo concentrations 2 calibration methods, to assess the purity of RI76, a novel antifungal drug candidate. NMR acquisition and processing parameters were optimized in order to obtain spectra with intense, well-resolved signals of completely relaxed nuclei. The analytical method was validated following current guidelines, demonstrating selectivity, linearity, accuracy, precision, and robustness. The calibration approaches were statistically compared, and no significant difference was observed when comparing the obtained results and their dispersion in terms of relative standard deviation. The proposed qNMR method may, therefore, be used for both qualitative and quantitative assessments of RI76 in early drug development and for characterization of this compound.     

Everything you wanted to know about phase and reference frequency in one- and two-dimensional NMR spectroscopy

The fundamental concept of phase discussed in this tutorial aimed at providing students with an explanation of the delays and processing parameters they may find in nuclear magnetic resonance (NMR) pulse programs. We consider the phase of radio-frequency pulses, receiver, and magnetization and how all these parameters are related to phases and offsets of signals in spectra. The impact of the off-resonance effect on the phase of the magnetization is discussed before presenting an overview of how adjustment of the time reference of the free induction decay avoids first-order correction of the phase of spectra. The main objective of this tutorial is to show how the relative phase of a pulse and the receiver can be used to change the reference frequency along direct and indirect dimensions of NMR experiments. Unusual of phase incrementation with non-90° angles will be illustrated on one- and two-dimensional NMR spectra.     

13C chemical shift tensors in MOF α-Mg3(HCOO)6: Which component is more sensitive to host-guest interaction?

Metal–organic frameworks (MOFs) are a class of important porous materials with many current and potential applications. Their applications almost always involve the interaction between host framework and guest species. Therefore, understanding of host–guest interaction in MOF systems is fundamentally important. Solid-state NMR spectroscopy is an excellent technique for investigating host–guest interaction as it provides information complementary to that obtained from X-ray diffraction. In this work, using MOF α-Mg₃(HCOO)₆ as an example, we demonstrated that ¹³C chemical shift tensor of organic linker can be utilized to probe the host–guest interaction in MOFs. Obtaining ¹³C chemical shift tensor components (δ₁₁, δ₂₂, and δ₃₃, where δ₁₁ ≥ δ₂₂ ≥ δ₃₃) in this MOF is particularly challenging as there are six coordinatively equivalent but crystallographically non-equivalent carbons in the unit cell with very similar local coordination environment. Two-dimensional magic-angle-turning experiments were employed to measure the ¹³C chemical shift tensors of each individual crystallographically non-equivalent carbon in three microporous α-Mg₃(HCOO)₆ samples with different guest species. The results indicate that the δ₂₂ component (with its direction approximately being co-planar with the formate anion and perpendicular to the C−H bond) is more sensitive to the adsorbate molecules inside the MOF channel due to the weak C−H···O hydrogen bonding or the ring current effect of benzene. The ¹³C isotropic chemical shift, on the other hand, seems much less sensitive to the subtle changes in the local environment around formate linker induced by adsorption. The approach described in this study may be used in future studies on host–guest interaction within MOFs.     

Cross-polarization with magic-angle spinning kinetics and impedance spectroscopy study of proton mobility,local disorder,and thermal equilibration in hydrogen-bonded poly(methacrylic acid)

The ¹H–¹³C cross-polarization with magic-angle spinning (CP MAS) kinetics was studied in poly(methacrylic acid) (PMAA) having the purpose to track the links between the local order in the main chain and the proton dynamics in peripheral hydrogen bond networks. The experimental CP MAS kinetic curves were analyzed applying the models of isotropic and anisotropic spin-diffusion with thermal equilibration. The fractal dimension D_p ≈ 3 was deduced that indicates that PMAA behaves as an isotropic 3D-system. No proton conductivity in the neat PMAA was deduced from the impedance spectroscopy data analyzing the frequency dependences of the complex dielectric permittivity. The value of local order parameter S = 0.70 for CH₂ in PMAA occupies an intermediate position between 0.63 and 0.85 deduced for CH₂ sites in the main chains of poly(vinyl phosphonic acid) and poly(2-hydroxyethyl methacrylate), that is, the true proton conductor and the polymer that contains the H-bond network, however, no proton conductivity, respectively.